Woocommerce Menu

Caulking Windows and Doors: Whys and Hows.



Caulking is an important undertaking since it blocks all cracks and gaps existing around your Durham windows and doors. It is done to stop air and water infiltration into your room. However, many people apply caulk around windows and doors and end up not achieving its purpose.

To get the best results, the caulk should be applied to both the exterior and interior of your windows and doors. This article shows you how to apply caulk the right way and why it is important to do it. See the weblink here for more info.

1. Check Temperature.

It is not advisable to apply calk around your Durham doors during the winter. During this season, the temperature can even fall below zero degrees, a thing that will affect your project significantly. The summer is also not the right time to caulk your doors and windows since the cracks might swell. Calking should be done when the weather’s warm.

2. Get the Area Ready for Caulking.

You need to ensure that the area where you want to apply caulk on your Durham windows and doors is clean. If there is any existing caulk, get rid of it using a knife. If the dirt is permanently stuck, you can use a solvent to remove it. If you use solvent, wait until the area is dry before you apply the caulk. Applying it directly will lock in moisture, and that can cause issues later.

3. Select Your Caulk Carefully.

When buying your caulk, you will be presented with options such as acrylic and silicone. Always avoid acrylic caulk since it can shrink and leave some gaps. It is advisable to use silicone since it offers the best protection of your doors and windows.

Caulking Windows and Doors: Whys and Hows.

4. Employ the Correct Technique.

The secret to best caulk application is knowing how to hold the gun. To make sure all the cracks are well filled, hold the gun at 45 degrees angle. That way, no air bubbles will be left in the caulk.

Once you start, make sure you move from one corner to another rather than having breaks at the center. This will ensure the caulking is smooth.

5. Fill the Cracks.

Sometimes the caulk will not fill all the cracks on your Durham windows and doors. In such cases, use the head of the knife and push the caulk in the gaps to ensure they are filled. You may also consider using your hand to smoothen the caulk in case the caulk is not easily fitting where you need it. By utilizing these techniques, you will be assured of the best results.

6. Use Tools.

You will need more tools and not just the caulking gun. For instance, a putty knife will come in handy if the caulk doesn’t get where it is supposed to be put, and you should use something to drive it in.

Tags: